UCP210-114D1 – NTN UCP PILLOW BLOCK CAST IRON SET SCREW 1 7/8″ BORE
DIMENSIONAL DATA
| Dimension | Description | Size (mm) | Size (in) |
|---|---|---|---|
| d | Bore Diameter | 47.6 mm | 1.8750″ |
| L | Overall Housing Length | 206.4 mm | 8.1250″ |
| J | Bolt Hole Center-to-Center Spacing | 158.8 mm | 6.2500″ |
| A | Distance from Base to Shaft Centerline | 60.3 mm | 2.3750″ |
| A1 | Height of Flange Shoulder | 20.6 mm | 0.8125″ |
| A2 | Height from Base to Top of Bearing Ring | 114.3 mm | 4.5000″ |
| A5 | Overall Housing Height | 65.1 mm | 2.5625″ |
| N | Mounting Bolt Hole Diameter | 19.8 mm | 0.7813″ |
| B | Insert Bearing Width | 51.6 mm | 2.0315″ |
| S | Distance from Flange to Bearing Centerline | 19.0 mm | 0.7480″ |
TECHNICAL SPECIFICATIONS
| Specification | Value |
|---|---|
| Type | Pillow Block Unit |
| Bearing Type | Ball Bearing |
| Locking Device | Set Screw |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| End Type | Open |
| Performance | Light Duty |
| Operating Temperature Range | -40 to 250 ºF / -40 to 120 ºC |
| Lubrication | Relubricatable |
